Welcome, Guest LOG IN or REGISTER

BestgasTech Support:  (+86) 027-85568699, Email: ava.wong@hkxytech.com

RAEGuard 2 PID Easily calibrated, fixed VOC monitor D03-0001-C00

RAEGuard 2 PID

RAEGuard 2 PID Easily calibrated, fixed VOC monitor D03-0001-C00


FGM-2001 RAEGuard 2 PID(Diffusion) 0-100 ppm VOC Fixed Detector for VOC’s


Share this product

RAEGuard 2 PID Fixed Detector for VOC’s


Continuously monitor for the threat of Volatile Organic Compounds (VOCs) in hazardous locations with the fixed RAEGuard 2 PID detector. This monitor is easy to configure and maintain in the field thanks to a modular design with easy access to PID lamp and sensor, without the need for tools. The internal diaphragm pump speeds sample flow-throw and the unit delivers highly accurate readings with both digital and analog outputs. Low, high, and fault relays can be configured to trigger alarms or integrate with your process controls for automatic shutdown in response to VOC threats. A magnetic key interface enables the detector to be calibrated and operational parameters adjusted with the explosion-proof enclosure in place.

Key Features

Fixed, field-configurable detector for VOCs
Continuous measurement
Pre-programmed correction factors for more than 200 compounds
Digital and analog outputs
Simplified calibration and maintenance with removable PID sensor
Graphic display and LED status indicator for fault and alarm conditions
Configurable low, high, and fault relays can trigger alarms or process controls
Explosion-proof enclosure
Magnetic key interface for access to sensor without opening enclosure
Internal pump speeds sample flow
Humidity compensation


Refineries and petrochemical plants
Power plants
Solvent recovery systems
Painting and coating operations
Waste water treatment plants
Air Quality

Additional information

Weight3500 g
Dimensions257 × 201 × 107 cm

PID (photoionization detector)


Digital Smart Sensor


Internal diaphragm pump

Working Current

DC 10 to 28V, 210mA at 24V




Three-level programmable alarm relays (30 VDC, 2A)
RS-485 (Supports Modbus)

IP Rating


Mechanical Interface

3/4" NPT Male


2" pipe-holding or wall mounting

User Interface

Three-key magnetic bar adjustment


Two or three points


-20° C to +55° C (-4° F to 131° F)


0 to 95% relative humidity, non-condensing


90 to 110kPa


128×64 matrix backlit LCD, supports graphic display


Stainless steel