SPXCDALMO1M Honeywell Sensepoint XCD Gas Detector

General Specification

• Use
  3-wire, 4-20 mA, gas detector transmitter for use with directly installed flammable and toxic gas sensors. For the
  protection of personnel and plant from flammable and toxic gas hazards.
• Electrical
  Input Voltage Range: 16 to 32 Vdc (24 Vdc nominal) for ATEX/IECEx/AP Versions
  12 to 32 Vdc (24 Vdc nominal) for UL/CSA version
  Max Power Consumption: Max 5 Watts. at 24 Vdc (see chapter 2 regarding maximum in rush
  current) Current output 4-20 mA (Source or Sink)
  ≥0.0<1.0 mA Fault (refer to table 5 chapter 11.3 for further details).
  4.0 mA to 20.0 mA Normal gas measurement
  2.0 mA or 4.0 mA (17.4 mA) Inhibit (during configuration/user settings)
  22.0 mA Maximum over range
  Max load resistance 250 Ω
  Terminals 15 x screw terminals suitable for wire diameter 0.5 mm2 to 2.5 mm2 (20 AWG
  to 13 AWG).
  Relays 3 x 5 A@250 VAC. Selectable normally open or normally closed (switch) and
  energized/de-energized (programmable).
  Communication RS485, Modbus RTU
• Construction
  Material Epoxy painted aluminium alloy or 316 Stainless Steel
  Weight Aluminum alloy: 1.7 kg, 316 Stainless Steel: 3.7 kg
  Mounting： Pole or wall mounting
  Entries 2 x M20 (for ATEX/IECEx/AP Approval) or 2×3/4’ NPT (for UL Approval)
• Environmental
  IP Rating: IP66 in accordance with EN60529:1992
  Operating Temperature: -40ºC to +75ºC/ -40ºF to +167ºF
  Note: The detector display may become illegible at temperatures below -40°C, but the detector continues its gas
  monitoring function. The display is not damaged and recovers when the temperature rises back above -20 °C.
  Operating Humidity： Continuous 20-90 % RH (non-condensing), Intermittent 10-99 % RH (non-condensing)
  Operating Pressure： 90-110 kPa (EC Toxic Sensors), 80-120 kPa (EC Oxygen, Catalytic Bead and Infrared Sensors)
  Storage Conditions (detector and accessories)： -25°C to +65°C (-13°F to +149°F)

HONGKONG XIEYUAN TECH CO., LIMITED
ava.wong@hkxytech.com
Mob/WhatsApp: 86-15602323637