PSE250-600-70-1|ABB

• General Information

Global Commercial Alias:PSE250-600-70-1
Extended Product Type:PSE250-600-70-1
Product ID:1SFA897113R7001
Product Net Width: 190 mm
Product Net Height: 435 mm
Product Net Depth / Length: 237 mm
Product Net Weight: 10.6 kg
ABB Type Designation:PSE250-600-70-1
EAN:7320500515037
Catalog Description:PSE250-600-70-1 Softstarter – 250 A – 208 … 600 V AC

• Long Description
  The softstarter PSE250-600-70-1 has a rated maximum operational current of
  250 A with an operating voltage span from 208…600 V AC. The rated control voltage
  is between 100…250 V AC at 50/60 Hz. PSE features a two-phase control with a soft
  start and stop through a voltage or a torque ramp. It has built-in bypass for
  easy installation and energy saving. A RUN, TOR, and Event signal is available from
  a relay output in NO (normally open state). The PSE has functions such as current limit,
  kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE,
  it has an Illuminated display that uses symbols to become language neutral. As an option,
  you can add an identical external keypad with a rating of IP66. There are three ways to
  communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault.
  Another popular option is the built-in fieldbus communication Modbus RTU.
  You can also use an external adaptor and a Fieldbus plug. PSE is a true general pur­pose softstarter.
  It’s a perfect balance be­tween high starting capacity and cost effi­ciency.
  Very suitable for small to medium-sized three-phase motors with nominal currents from 18…370 A.
  Typical applications are, for example, pumps, fans, compressors, and conveyors.

HONGKONG XIEYUAN TECH CO., LIMITED
ava.wong@hkxytech.com
Mob/WhatsApp: 86-15602323637