Welcome, Guest LOG IN or REGISTER

BestgasTech Support:  (+86) 027-85568699, Email: ava.wong@hkxytech.com

Honeywell Sensepoint XCD Fixed Gas Detectors SPXCDULNHX

SPXCDASMRXM

Honeywell Sensepoint XCD Fixed Gas Detectors SPXCDULNHX

$921.00

Honeywell Sensepoint XCD SPXCDULNHX- UL approved SP XCD Hydrogen Sulfide 0-50ppm (10.0 to 100.0ppm, 1ppm) with LM25,3/4″NPT Entry

Compare

Share this product

Honeywell Sensepoint XCD Explosion-Proof Transmitters SPXCDULNHX

SPXCDASMRXM

Sensepoint XCD 
Transmitter provides comprehensive monitoring of combustible, toxic and Oxygen gas hazards in potentially explosive atmospheres – indoors and outdoors.

Features & Benefits

  • All-in-one gas monitoring solution
  • Proven SurecellTM electrochemical sensors
  • Global approvals

Quick Specs

  • Input voltage range: 16 to 32 VDC (24 VDC nominal)
  • Communication: RS485, MODBUS RTU
  • Certified temperature range: 40° to +149°F (-40° to +65°C)

Product Overiew
Sensepoint XCD now has remote monitoring capabilities for its toxic and Oxygen sensors. Its  remote capability is designed to offer excellent flexibility of use and is an ideal solution for hard-to-reach locations or areas where the transmitter needs to be separate from the sensor.

Additional Features and Benefits:

All-In-One Gas Monitoring Solution

  • Flammable (catalytic or infrared), toxic and oxygen versions available
  • Serves new/retrofit, indoor/outdoor applications
  • Stainless steel or aluminum explosion-proof housing options
  • IP66 as standard

Proven and Reliable Sensor Technology

  • SurecellTM electrochemical sensors
  • Poison immune infrared sensors
  • Poison resistant catalytic bead sensors
  • Long life sensors

Global Approvals

  • US and Latin America, European, Canadian and Asian
  • Compliant with UL, INMETRO, ATEX, IECEx, CSA, KTL, PA, GB and CCCF standards

SPXCDASMRXM

Easy to Use

  • User friendly and intuitive tri-color backlit display with digits, bar graph and icons
  • Fully configurable via magnetic switches
  • Optional remote sensor mounting
  • Selectable sink or source 4-20mA output
  • MODBUS communications for remote diagnostics/configuration

Cost Effective

  • Common transmitter platform
  • Minimal training required
  • Reduced spares
  • Non-intrusive, one-man operation
  • Plug-in sensor replacement
  • MODBUS multi drop option offers cabling savings

Simple Installation

  • Plug-in display module removes to give access to terminal area
  • Integral mounting bracket
  • 2 x M20 or ¾” NPT cable/conduit entries
  • Removable plug/socket type terminal blocks for
  • Sink/source switch to suit preferred wiring topology
  • Integral mounting plate attaches to surface, horizontal or vertical piping

Accessories

Sensepoint XCD Duct mounting kit
SPXCDDMK
Duct mounting kit

Sensepoint XCD Mounting bracket
SPXCDMTBR
Mounting bracket (inc. bolts, nuts, brackets)

Sensepoint XCD Sunshade / Deluge Protection
SPXCDSDP
Sunshade / Deluge Protection

Additional information

Use

3 wire, 4-20mA and RS485 MODBUS output fixed point detector with in-built alarm and fault relays for the protection of personnel and plant from flammable, toxic and
Oxygen hazards. Incorporates a transmitter with local display and fully configurable via non-intrusive magnetic switch interface.

Input Voltage Range

12 to 32VDC (24VDC nominal)

Communication

RS485, MODBUS RTU

Certified temperature range

40° to +149°F (-40° to +65°C)

Material

Housing: Epoxy painted aluminium alloy ADC12 or 316 stainless steel
Sensor: 316 stainless steel

Mounting

Integral mounting plate with 4 x mounting holes suitable for M8 bolts. Optional pipe mounting kit for horizontal or vertical pipe Ø1.5 to 3" (2" nominal)

Cable Entries

ULcUL versions: 2 x ¾”NPT conduit entries. Suitable blanking plug supplied for use if only 1 entry used. Seal to maintain IP rating; ATEX/IECEx versions: 2 x M20 cable entries

Max Power Consumption

Maximum power consumption is dependent on the type of gas sensor being used. Electrochemical cells = 3.7W, IR = 3.7W
and catalytic = 4.9W. Maximum inrush current = 800mA at 24VDC

IP Rating

IP66 in accordance with EN60529:1992

Weight (approx)

Aluminium Alloy LM25: 4.4lbs
316 Stainless Steel: 11lbs