900SP1-0300| Honeywell Expansion Processor Module

Brand: Honeywell
Item No.: 900SP1-0300
Condition:Brand New
Warranty: one year
Description: Expansion Processor Module

Expansion Processor Module (900SP1-0200) and Ext. Temp (-40 to 70°C)
Model (900SP1-0300)

EPM acts as the interface module between expansion I/O
and control processor module. Required for I/O racks to
communicate to CPMs in a different rack.

Processor: Dual Core ARM® Cortex™-A9 Core (32 bit) 667 MHz
Rotary Address Switch: Determine the Rack address range from 1 to 99
LED: 2 LEDs, three color each, indicate the status of EPM

Communication Capabilities
Ethernet Ports: 2
Network connection: Shielded RJ45 connector, auto-crossover
Network port speed: 10/100BaseTx, auto-detecting
Isolation: 1500 Volts RMS 1 minute, 60 Hz
Transient Voltage Suppression: 600W peak pulse power
capability at 10×1000μs waveform, repetition
rate:0.01%
Diagnostic LEDs on each port: Yes
Protocols, EPM ports 1 & 2: I/O Communication

I/O Network Topology
ControlEdge 900 platform hardware supports Star,
Ring and DLR topology to connect Expansion I/O rack, EtherNet/IP, and
PROFINET I/O devices with CPM rack.

Expansion I/O Network Topology: Star, Ring or DLR topology
supported up to 100baseTx using standard RJ45

connections for both Redundant and non-redundant systems.
I/O network maximum cable lengths: Shielded Ethernet cable
100 m (328 ft.) CPM to EPM (expansion I/O rack), or to switch.

Fiber optic cable
multi-mode: 5000m (16,404 ft.)1 CPM to EPM or to switch.
Single mode: 40km (131,234 ft.) 1 CPM to EPM or to switch.

HONGKONG XIEYUAN TECH CO., LIMITED
ava.wong@hkxytech.com
Mob/WhatsApp: 86-15602323637